Products
TWQJ-1025  AIRBAG LIFT

?With lowest height at 120mm, This ultra-thin lifter makes the earthwork foundation unnecessary. 

As required, the lifter platform has lengthening function that the platform length can be adjusted automatically when lifting normal-length cars and extra-length cars. 

Auxiliary accessories are available.

Electric power: Do not need power

?Lifting capacity:2500 kg 
Max. lifting height500 mm
Min. height120mm
Air pressure≤0.7MPa
Approx. Weight500 kg
TWJ-2030E LOW RISE LIFT

?It ??is ultra-thin type, suitable for all kinds of cars with ultra-low chassis.   

The platform and the pump can be separated, which can be used at different sites with good operation.                   

It is extremely suitable for tire fast-repair shop which makes the tire changing easy and fast.


?Lifting capacity3000 kgPlatform width500 (mm) 
Max. lifting       height1000mm power220v/240v/         380v/410v
Min. height110  mmMotor power2.2KW
Platform length1450 -        2000(mm) Approx. Weight520 kg 
TWJ-580 LOW RISE LIFT
It is ultra-thin type, suitable for all kinds of cars with ultra-low chassis.
The platform and the pump can be separated, which can be used at different sites with good operation.
It is extremely suitable for tire fast-repair shop which makes the tire changing easy and fast.
?Lifting capacity2500 kgPlatform width580 (mm) 
Max. lifting       height580mm power220v/240v/         380v/410v
Min. height80  mmMotor power1.5KW
Platform length1400(mm) Approx. Weight400 kg 
TWJ-5035B LOW RISE LIFT
It is ultra-thin type, suitable for all kinds of cars with ultra-low chassis.
The platform and the pump can be separated, which can be used at different sites with good operation.
It is extremely suitable for tire fast-repair shop which makes the tire changing easy and fast.
?Lifting capacity3500 kgMotor power2.2KW
Max. lifting       height1150mm power220v/240v/         380v/410v
Min. height120  mmApprox. Weight400kg
QD-52-C PNEUMATIC TIRE EXPENDER

 According to the tire size, fix the hook into the proper mounting hole.

According to the tire size, adjust the hook support height.The tool shelf makes tools within reach for convenient picking-up and putting-back.

The illumination can also be adjusted according to the working place.

The water and oil separator can make lubrication function. With keeping certain oil level in the oil cup, water moisture in the air can not go inside the air cylinder.


Technical parameter:

Working pressure     0.8-1.0MPa

For tire width       below 1,200 

Size:                610x630x1020mm

Weight:              80KG

QD-62 FLOOR TYPE TIRE EXPENDER

The hook can be fixed at three different levels and be adjusted to fit the tire.
The floor type enables the operator to adjust the operating platform height accordingly.
The auxiliary tire-loading device can help load the oversized tire with reduced manpower costs and improved efficiency. 


Technical parameter:

Working pressure    0.8-1.0MPa

For tire width      below 1,200-20 large and medium-sized                     tire

Size:                1250x850x740mm

Weight:              138KG

DB-08 INNER TUBE  POINT VULCANIZER

It is specially designed to vulcanize inside tube damage.
It can heat both upper part and lower part simultaneously or separately, and can set the heating time by the timer.




Technical parameter:

Power supply            220V/800W

Applicable range:               all sorts of small size tires tube tires   

Vulcanizing temperature: adjustable           

Size:                   400x200x500mm

Weight:                 8KG

DB-18 INNER TUBE AND TIRE COVER VULCANIZER

It is specially designed to vulcanize inside tube cover damage.
It can heat both upper part and lower part simultaneously or separately, and can set the heating time by the timer.


For small tire.



Technical parameter:

Power supply            220V/800W

Applicable range:               all sorts of small size tires (16")   

Vulcanizing temperature: adjustable           

Size:                   570x280x810mm

Weight:                 29KG

DB-88B OVERTURN VULCANIZER

It can vulcanize any part of model 750-16 to model 10-20 tires in single surface or double surfaces.
It can maintain constant temperature automatically to ensure the temperature required during tire vulcanization.
It can raise, lower or overturn the operating bracket to vulcanize according to the repair position of the tires of different models.
It is equipped with five moulds in different angle and a purpose made heat conduct sand bag, which can ensure the repaired tire more conforms to the normal condition.

Technical parameter:

Power supply:           220V/800W

Applicable range:       750 to 10.00-20 tires

Vulcanizing temperature:     auto controlled           

Size:                   600x300x1150mm

Weight:                 50KG

湖北快三开奖时间